Resistors for mkiv 550's ?

Noremac · 07-28-2010, 11:23 AM

I have a set of USDM 550cc injectors that I want to throw in my 1jz. I've looked through my power fc and I cant find a setting to change from high to low impedance.

I'm thinking that I have no choice but to wire resistors inline. I know that people typically try to use the factory jza80 resistor box, but they seem to be hard to find.

Does anybody know of a readily available alternative? (mk3?)

Noremac · 07-28-2010, 11:50 AM

Found this link on SF.

http://www.supramania.com/forums/sho...2-Resistor-Box

acura tl, or cl?

Noremac · 07-28-2010, 04:30 PM

Ok, so I did some more digging and it seems that the resistance values from a mk3 resistor box are close enough to use with the mkiv injectors.

Does anybody have a mk3 resistor box for sale?

WeDgE · 07-28-2010, 09:10 PM

When I go down to Lethbridge in a few weeks I should be able to sell the one out of my 87T. I don't think I'll need it for my Megasquirt.

Noremac · 07-29-2010, 08:48 AM

That sounds good, how much do you want for it?

WeDgE · 07-29-2010, 10:53 AM

$30 would be just fine.

Noremac · 07-29-2010, 10:54 AM

SOLD let me know asap.

WeDgE · 07-29-2010, 12:32 PM

Yep, no problem. I'll be heading down there middle of August.

07-28-2010, 11:23 AM	#1
Noremac Member Join Date: Nov 2009 Location: SE Calgary Posts: 62	Resistors for mkiv 550's ? I have a set of USDM 550cc injectors that I want to throw in my 1jz. I've looked through my power fc and I cant find a setting to change from high to low impedance. I'm thinking that I have no choice but to wire resistors inline. I know that people typically try to use the factory jza80 resistor box, but they seem to be hard to find. Does anybody know of a readily available alternative? (mk3?)

07-28-2010, 09:10 PM	#4
WeDgE Senior Member Join Date: Jan 2006 Location: Fort McMurray Posts: 423	When I go down to Lethbridge in a few weeks I should be able to sell the one out of my 87T. I don't think I'll need it for my Megasquirt. __________________ - Damian "TRB0SLT" 1987 Toyota Supra Turbo - Project 1JZ

07-29-2010, 10:53 AM	#6
WeDgE Senior Member Join Date: Jan 2006 Location: Fort McMurray Posts: 423	$30 would be just fine. __________________ - Damian "TRB0SLT" 1987 Toyota Supra Turbo - Project 1JZ

07-29-2010, 12:32 PM	#8
WeDgE Senior Member Join Date: Jan 2006 Location: Fort McMurray Posts: 423	Yep, no problem. I'll be heading down there middle of August. __________________ - Damian "TRB0SLT" 1987 Toyota Supra Turbo - Project 1JZ

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-28-2010, 11:50 AM	#2
Noremac Member Join Date: Nov 2009 Location: SE Calgary Posts: 62	Found this link on SF. http://www.supramania.com/forums/sho...2-Resistor-Box acura tl, or cl?

07-28-2010, 04:30 PM	#3
Noremac Member Join Date: Nov 2009 Location: SE Calgary Posts: 62	Ok, so I did some more digging and it seems that the resistance values from a mk3 resistor box are close enough to use with the mkiv injectors. Does anybody have a mk3 resistor box for sale?

07-29-2010, 08:48 AM	#5
Noremac Member Join Date: Nov 2009 Location: SE Calgary Posts: 62	That sounds good, how much do you want for it?

07-29-2010, 10:54 AM	#7
Noremac Member Join Date: Nov 2009 Location: SE Calgary Posts: 62	SOLD let me know asap.