88 supra 7mge distributer vs 91 7mge cressida distributer

[drift zamurai]

Need some help. So i broke my distributer from the 91 cressida with 7mge. So i grabbed my distributer from a 88 supra 7mge. They look different and the plug is different. I re wired the plug to work with the cressida through shop wire diagrams. Also when i put the supra distributer in the rotor does not line up with cylinder 1 on the cap. With out maxing out the timing on the distributer. I can get it to run when wide open throttle revs good but when letting off the throttle engine runs like crap. I have gone through everything. I beleave the supra disteibuter is the culprit but would like confermation if any one had tryed it befor